The short version
A green pool means algae has taken hold. It happens when the sanitiser can’t keep up: the level has dropped, the water is out of balance so the sanitiser isn’t working properly, circulation is poor, or something has added a lot of nutrients.
Common causes
- Low or no chlorine, for example after a busy weekend, a heatwave or a chlorinator that stopped producing.
- The pump not running long enough, a blocked skimmer basket or a dirty filter.
- Heavy rain or a storm, which dilutes the water and adds leaves and nutrients.
- A pool left alone for a few weeks in warm weather.
- High pH or too much stabiliser, which slows the chlorine down.
What to do first
- Keep swimmers and pets out.
- Check the pump is running, and empty the skimmer and pump baskets.
- Take out leaves and debris with a net.
- Test the water if you can, or get it tested. Treatment depends on the readings.
- Don’t add several chemicals at once or mix products.
Send us a photo and tell us how long it’s been green. We’ll tell you whether it’s something you can sort out or a job for us. See green pool recovery.
Why it’s more than chlorine
Tipping in chlorine is the obvious move, but if the pH is high or the stabiliser is too high, much of it won’t do its job. The filter also has to cope with a lot of dead algae, and it may need cleaning more than once. A proper recovery balances the water, removes debris, treats the algae and re-tests until it’s clear.
How to stop it coming back
- Test the water regularly, especially in hot weather and after rain.
- Run the pump long enough each day for the size of the pool.
- Keep the skimmer and pump baskets clear, and the filter clean.
- Brush the walls and steps, which is where algae starts.
General information only. Every pool is different, so follow your pool builder’s and equipment makers’ instructions and the labels on any chemicals. Never mix pool chemicals, and keep them away from children and pets.