Pool water balance explained: what the numbers mean

Pool water is chemistry, and most pool problems are numbers that have drifted. Here’s what each reading does, and typical ranges to aim for.

6 minute read · Updated 16 November 2026

The short version

Five things matter most: sanitiser (chlorine or salt), pH, total alkalinity, stabiliser (cyanuric acid) and calcium hardness. They affect each other, which is why testing only one tells you very little.

The usual order is to look at alkalinity and pH first, because they decide how well the sanitiser works, then sanitiser, then the rest.

Typical ranges

These are commonly quoted ranges for a residential pool. Your pool builder, surface type and equipment makers may specify different ones, so treat them as a starting point.

  • Free chlorine: roughly 1 to 3 ppm. A salt chlorinator makes chlorine from the salt, so you still test chlorine.
  • pH: roughly 7.2 to 7.6.
  • Total alkalinity: roughly 80 to 120 ppm.
  • Stabiliser (cyanuric acid): roughly 30 to 50 ppm for most outdoor pools.
  • Calcium hardness: roughly 150 to 300 ppm. Concrete pools usually sit at the higher end.
  • Salt (salt pools): follow your chlorinator’s manual.

What each one does

  • Sanitiser kills algae and bacteria. Too low and the water goes green; the pool needs enough for its use and the weather.
  • pH is how acidic or basic the water is. Too high and chlorine works poorly and scale forms; too low and the water irritates eyes and can attack surfaces and equipment.
  • Total alkalinity buffers the pH so it doesn’t swing. If it’s off, the pH is hard to keep steady.
  • Stabiliser protects chlorine from the sun. Too little and sunlight burns it off; too much makes the chlorine slow and harder to keep effective.
  • Calcium hardness affects what the water does to surfaces. Very soft water can etch plaster; very hard water can leave scale.

Why one reading isn’t the answer

A pool with plenty of chlorine can still go green if the pH is high and the stabiliser is too high. A pool that stings the eyes can have a normal chlorine reading. Reading the numbers together is what a proper test is for. See our water testing service.

Safe handling

  • Never mix pool chemicals. Chlorine products and acids can release dangerous gases when combined.
  • Add chemicals to water, never water to chemicals, and follow the label.
  • Keep chemicals in their original containers, locked away, cool, dry and ventilated, out of reach of children and pets.
  • Wear eye protection and gloves when handling them, and wait the time the label says before swimming.

General information only. Every pool is different, so follow your pool builder’s and equipment makers’ instructions and the labels on any chemicals. Never mix pool chemicals, and keep them away from children and pets.

Straight answers.

The questions we get most. Anything else, send us a message.

Get a pool quote
How often should I test my pool?

Many owners test at least weekly in the swimming season, and after heavy rain, storms or busy days. See our guide on how often a pool should be serviced.

Are test strips good enough?

Strips are a quick check. A drop-based kit is more accurate, and we test at the pool with one.

Why does my pH keep rising?

It can be low alkalinity, a salt chlorinator, splash-out and aeration, or fresh plaster. A proper test shows which.

Tell us about your pool.

It takes about a minute. We’ll get back to you with a plan and a quote. If the pool is green or something looks wrong, say so, or call.

  • Sending an enquiry is free
  • Weekly, fortnightly, monthly or one-off
  • Salt and chlorine pools, spas and plunge pools
Prefer to call? 0400 000 000

A photo of the pool helps. We’ll ask for one when we call.

CallGet a quote